[Qmail-it] Simscan 2 (Errata Corrige)

[marco puca]

marco puca ha scritto:

>> dovrebbe bastare:
>> # QMAILQUEUE=/var/qmail/bin/simscan SIMSCAN_DEBUG=2
>> # strace -f /var/qmail/bin/qmail-inject puca at gualchierani.int < 
>> a-mail.txt
>>
>> se l'output è troppo lungo fai:  strace -f -o out.log /var/[...]
>
Incollo parte dell'output che evidenzia un problema:

[pid   613] open("/lib/tls/libc.so.6", O_RDONLY) = 1
[pid   613] read(1, 
"\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200X\1"...,  512) = 512
[pid   613] fstat64(1, {st_mode=S_IFREG|0755, st_size=1572440, ...}) = 0
[pid   613] old_mmap(NULL, 1279916, PROT_READ|PROT_EXEC, MAP_PRIVATE, 1, 
0) = 0x 877000
[pid   613] old_mmap(0x9aa000, 12288, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_FIXE D, 1, 0x132000) = 0x9aa000
[pid   613] old_mmap(0x9ad000, 10156, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_FIXE D|MAP_ANONYMOUS, -1, 0) = 0x9ad000
[pid   613] close(1)                    = 0
[pid   613] old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_ANONYMOUS , -1, 0) = 0xb75e2000
[pid   613] set_thread_area({entry_number:-1 -> 6, base_addr:0xb75e2500, 
limit:1 048575, seg_32bit:1, contents:0, read_exec_only:0, 
limit_in_pages:1, seg_not_pre sent:0, useable:1}) = 0
[pid   613] munmap(0xb75e3000, 77964)   = 0
[pid   613] brk(0)                      = 0x8613000
[pid   613] brk(0x8634000)              = 0x8634000
[pid   613] brk(0)                      = 0x8634000
[pid   613] fstat64(1, 0xbfff7294)      = -1 EBADF (Bad file descriptor)
[pid   613] mmap2(NULL, 8192, PROT_READ|PROT_WRITE, 
MAP_PRIVATE|MAP_ANONYMOUS, - 1, 0) = 0xb75f5000
[pid   613] write(1, "ERROR: insufficient parameters a"..., 42) = -1 
EBADF (Bad file descriptor)
[pid   613] time(NULL)                  = 1150373804
[pid   613] stat64("msg.1150373804.646781.612", 0xbfff9d0c) = -1 EACCES 
(Permiss ion denied)
[pid   613] munmap(0xb75f5000, 8192)    = 0

Sembrerebbe un problema di permessi, ma non riesco a capire dove si 
presenta.

Ciao e grazie Marco